Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-696.el6.x86_64 (mockbuild@c1bm.rdu2.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-18) (GCC) ) #1 SMP Tue Mar 21 19:29:05 UTC 2017
Command line: initrd=initrd0.img root=live:CDLABEL=CentOS-6.9-x86_64-LiveDVD rootfstype=auto ro liveimg quiet nodiskmount nolvmmount  rhgb rd.luks=0 rd.md=0 rd.dm=0   BOOT_IMAGE=vmlinuz0 
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
 BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cf3fa000 (usable)
 BIOS-e820: 00000000cf3fa000 - 00000000cf3fc000 (reserved)
 BIOS-e820: 00000000cf3fc000 - 00000000cf445000 (ACPI NVS)
 BIOS-e820: 00000000cf445000 - 00000000cf451000 (ACPI data)
 BIOS-e820: 00000000cf451000 - 00000000cf453000 (usable)
 BIOS-e820: 00000000cf453000 - 00000000cf454000 (ACPI NVS)
 BIOS-e820: 00000000cf454000 - 00000000cf46f000 (reserved)
 BIOS-e820: 00000000cf46f000 - 00000000cf480000 (ACPI NVS)
 BIOS-e820: 00000000cf480000 - 00000000cf507000 (reserved)
 BIOS-e820: 00000000cf507000 - 00000000cf508000 (ACPI NVS)
 BIOS-e820: 00000000cf508000 - 00000000cf51a000 (reserved)
 BIOS-e820: 00000000cf51a000 - 00000000cf524000 (ACPI NVS)
 BIOS-e820: 00000000cf524000 - 00000000cf535000 (reserved)
 BIOS-e820: 00000000cf535000 - 00000000cf578000 (ACPI NVS)
 BIOS-e820: 00000000cf578000 - 00000000cf800000 (usable)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000042e000000 (usable)
SMBIOS version 2.7 @ 0xF9BF0
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP Z210 Workstation/1587h, BIOS J51 v01.20 09/16/2011
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x42e000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xcf800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cf800000
 0000000000 - 00cf800000 page 2M
kernel direct mapping tables up to cf800000 @ 8000-d000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-000000042e000000
 0100000000 - 042e000000 page 2M
kernel direct mapping tables up to 42e000000 @ b000-19000
RAMDISK: 7ed22000 - 7fffe944
ACPI: Deleted _OSI(Windows 2012)
ACPI: Deleted _OSI(Windows 2013)
ACPI: RSDP 00000000000fe700 00024 (v02 HPQOEM)
ACPI: XSDT 00000000cf445070 00064 (v01 HPQOEM SLIC-WKS 01072009 AMI  00010013)
ACPI: FACP 00000000cf44ac90 000F4 (v04 HPQOEM SLIC-WKS 01072009 AMI  00010013)
ACPI: DSDT 00000000cf445168 05B23 (v02 HPQOEM SLIC-WKS 00000000 INTL 20051117)
ACPI: FACS 00000000cf51bf80 00040
ACPI: APIC 00000000cf44ad88 00072 (v03 HPQOEM SLIC-WKS 01072009 AMI  00010013)
ACPI: SSDT 00000000cf44ae00 00102 (v01 AMICPU     PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000cf44af08 0003C (v01 HPQOEM SLIC-WKS 01072009 MSFT 00000097)
ACPI: HPET 00000000cf44af48 00038 (v01 HPQOEM SLIC-WKS 01072009 AMI. 00000004)
ACPI: ASF! 00000000cf44af80 000A0 (v32 INTEL       HCG 00000001 TFSM 000F4240)
ACPI: SSDT 00000000cf44b020 05270 (v01 COMPAQ      WMI 00000001 MSFT 03000001)
ACPI: SLIC 00000000cf450290 00176 (v01 HPQOEM SLIC-WKS 00000001      00000000)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-000000042e000000
Bootmem setup node 0 0000000000000000-000000042e000000
  NODE_DATA [0000000000018000 - 000000000004bfff]
  bootmap [0000000000100000 -  0000000000185bff] pages 86
(8 early reservations) ==> bootmem [0000000000 - 042e000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 0002045964]    TEXT DATA BSS ==> [0001000000 - 0002045964]
  #3 [007ed22000 - 007fffe944]          RAMDISK ==> [007ed22000 - 007fffe944]
  #4 [000009bc00 - 0000100000]    BIOS reserved ==> [000009bc00 - 0000100000]
  #5 [0002046000 - 000204641b]              BRK ==> [0002046000 - 000204641b]
  #6 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
  #7 [000000b000 - 0000018000]          PGTABLE ==> [000000b000 - 0000018000]
found SMP MP-table at [ffff8800000f4b90] f4b90
 [ffffea0000000000-ffffea000ebfffff] PMD -> [ffff880028600000-ffff8800367fffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x0042e000
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
    0: 0x00000001 -> 0x0000009b
    0: 0x00000100 -> 0x000cf3fa
    0: 0x000cf451 -> 0x000cf453
    0: 0x000cf578 -> 0x000cf800
    0: 0x00100000 -> 0x0042e000
On node 0 totalpages: 4183582
  DMA zone: 56 pages used for memmap
  DMA zone: 119 pages reserved
  DMA zone: 3819 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 831164 pages, LIFO batch:31
  Normal zone: 45584 pages used for memmap
  Normal zone: 3288560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000cf3fa000 - 00000000cf3fc000
PM: Registered nosave memory: 00000000cf3fc000 - 00000000cf445000
PM: Registered nosave memory: 00000000cf445000 - 00000000cf451000
PM: Registered nosave memory: 00000000cf453000 - 00000000cf454000
PM: Registered nosave memory: 00000000cf454000 - 00000000cf46f000
PM: Registered nosave memory: 00000000cf46f000 - 00000000cf480000
PM: Registered nosave memory: 00000000cf480000 - 00000000cf507000
PM: Registered nosave memory: 00000000cf507000 - 00000000cf508000
PM: Registered nosave memory: 00000000cf508000 - 00000000cf51a000
PM: Registered nosave memory: 00000000cf51a000 - 00000000cf524000
PM: Registered nosave memory: 00000000cf524000 - 00000000cf535000
PM: Registered nosave memory: 00000000cf535000 - 00000000cf578000
PM: Registered nosave memory: 00000000cf800000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at cf800000 (gap: cf800000:2f51c000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s96600 r8192 d22184 u524288
pcpu-alloc: s96600 r8192 d22184 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4123543
Policy zone: Normal
Kernel command line: initrd=initrd0.img root=live:CDLABEL=CentOS-6.9-x86_64-LiveDVD rootfstype=auto ro liveimg quiet nodiskmount nolvmmount  rhgb rd.luks=0 rd.md=0 rd.dm=0   BOOT_IMAGE=vmlinuz0 
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Memory: 16399804k/17530880k available (5467k kernel code, 796552k absent, 334524k reserved, 6954k data, 1316k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:440
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3192.566 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.13 BogoMIPS (lpj=3192566)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21966 entries in 87 pages
x2apic not enabled, IRQ remapping init failed
APIC routing finalized to flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
PEBS disabled due to CPU errata, please upgrade microcode
... version:                3
... bit width:              48
... generic registers:      8
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             00000007000000ff
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (25540.52 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at cf3fc000 (299008 bytes)
PM: Registering ACPI NVS region at cf453000 (4096 bytes)
PM: Registering ACPI NVS region at cf46f000 (69632 bytes)
PM: Registering ACPI NVS region at cf507000 (4096 bytes)
PM: Registering ACPI NVS region at cf51a000 (40960 bytes)
PM: Registering ACPI NVS region at cf535000 (274432 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
NMI watchdog enabled, takes one hw-pmu counter.
PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xfa02a000-0xfa02a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.2: reg 10: [io  0xf0f0-0xf0f7]
pci 0000:00:16.2: reg 14: [io  0xf0e0-0xf0e3]
pci 0000:00:16.2: reg 18: [io  0xf0d0-0xf0d7]
pci 0000:00:16.2: reg 1c: [io  0xf0c0-0xf0c3]
pci 0000:00:16.2: reg 20: [io  0xf0b0-0xf0bf]
pci 0000:00:16.3: reg 10: [io  0xf0a0-0xf0a7]
pci 0000:00:16.3: reg 14: [mem 0xfa029000-0xfa029fff]
pci 0000:00:19.0: reg 10: [mem 0xfa000000-0xfa01ffff]
pci 0000:00:19.0: reg 14: [mem 0xfa028000-0xfa028fff]
pci 0000:00:19.0: reg 18: [io  0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xfa027000-0xfa0273ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfa020000-0xfa023fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xfa026000-0xfa0263ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io  0xf090-0xf097]
pci 0000:00:1f.2: reg 14: [io  0xf080-0xf083]
pci 0000:00:1f.2: reg 18: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 1c: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xfa025000-0xfa0257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xfa024000-0xfa0240ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0xf000-0xf01f]
pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf7ffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd8000000-0xdbffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xf8000000-0xf807ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xf8080000-0xf8083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
  alloc irq_desc for 24 on node -1
  alloc kstat_irqs on node -1
  alloc irq_desc for 25 on node -1
  alloc kstat_irqs on node -1
  alloc irq_desc for 26 on node -1
  alloc kstat_irqs on node -1
  alloc irq_desc for 27 on node -1
  alloc kstat_irqs on node -1
HPET: 8 timers in total, 4 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed10000-0xfed19fff]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xfed90000-0xfed93fff]
pnp 00:01: [mem 0xfed20000-0xfed3ffff]
pnp 00:01: [mem 0xfee00000-0xfee0ffff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io  0x0620-0x063f]
pnp 00:02: [io  0x0800-0x07ff disabled]
pnp 00:02: [io  0x0610-0x061f]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io  0x0060]
pnp 00:03: [io  0x0064]
pnp 00:03: [irq 1]
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:04: [irq 12]
pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:05: [dma 4]
pnp 00:05: [io  0x0000-0x000f]
pnp 00:05: [io  0x0081-0x0083]
pnp 00:05: [io  0x0087]
pnp 00:05: [io  0x0089-0x008b]
pnp 00:05: [io  0x008f]
pnp 00:05: [io  0x00c0-0x00df]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: [io  0x0070-0x0071]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io  0x0061]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: [io  0x0010-0x001f]
pnp 00:08: [io  0x0022-0x003f]
pnp 00:08: [io  0x0044-0x005f]
pnp 00:08: [io  0x0062-0x0063]
pnp 00:08: [io  0x0065-0x006f]
pnp 00:08: [io  0x0072-0x007f]
pnp 00:08: [io  0x0080]
pnp 00:08: [io  0x0084-0x0086]
pnp 00:08: [io  0x0088]
pnp 00:08: [io  0x008c-0x008e]
pnp 00:08: [io  0x0090-0x009f]
pnp 00:08: [io  0x00a2-0x00bf]
pnp 00:08: [io  0x00e0-0x00ef]
pnp 00:08: [io  0x04d0-0x04d1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io  0x00f0-0x00ff]
pnp 00:09: [irq 13]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0a: [io  0x0400-0x0453]
pnp 00:0a: [io  0x0458-0x047f]
pnp 00:0a: [io  0x1180-0x119f]
pnp 00:0a: [io  0x0500-0x057f]
pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: [mem 0xfec00000-0xfecfffff]
pnp 00:0a: [mem 0xfed08000-0xfed08fff]
pnp 00:0a: [mem 0xff000000-0xffffffff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0b: [io  0x0454-0x0457]
pnp 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0c: [mem 0xfed00000-0xfed003ff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:02: [io  0x0620-0x063f] has been reserved
system 00:02: [io  0x0610-0x061f] has been reserved
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:0a: [io  0x0400-0x0453] has been reserved
system 00:0a: [io  0x0458-0x047f] has been reserved
system 00:0a: [io  0x1180-0x119f] has been reserved
system 00:0a: [io  0x0500-0x057f] has been reserved
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [io  0x0454-0x0457] has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: PCI bridge to [bus 06-06]
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:06.0: setting latency timer to 64
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.6: PCI INT C -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf9ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref]
pci_bus 0000:06: resource 4 [io  0x0000-0x03af]
pci_bus 0000:06: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:06: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:06: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:06: resource 10 [mem 0xd0000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19314k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1512048659.697:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32068
SELinux:  Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 1A01485A64DD991D
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 28 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 28 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
  alloc irq_desc for 29 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:06.0: irq 29 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 30 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
  alloc irq_desc for 31 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 31 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
  alloc irq_desc for 32 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.6: irq 32 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000cf51be18 00084 (v01    AMI      CST 00000001 MSFT 03000001)
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:16.3: ttyS0 at I/O 0xf0a0 (irq = 17) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfa027000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-696.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfa026000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-696.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2017-11-30 13:31:00 UTC (1512048660)
Initalizing network drop monitor service
Freeing unused kernel memory: 1316k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 656k freed
Freeing unused kernel memory: 1548k freed
dracut: dracut-004-409.el6_8.2
dracut: root was live:/dev/disk/by-label/CentOS-6.9-x86_64-LiveDVD, liveroot is now live:CDLABEL=CentOS-6.9-x86_64-LiveDVD
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
udev: starting version 147
ACPI: WMI: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: NVIDIA GF106 (0c3c00a1)
  alloc irq_desc for 33 on node -1
  alloc kstat_irqs on node -1
nouveau 0000:01:00.0: irq 33 for MSI/MSI-X
usb 1-1: new high speed USB device number 2 using ehci_hcd
nouveau 0000:01:00.0: bios: version 70.06.31.02.02
nouveau 0000:01:00.0: setting latency timer to 64
nouveau 0000:01:00.0: fb: 1024 MiB GDDR5
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
[TTM] Zone  kernel: Available graphics memory: 8211320 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.0
nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000
nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030
nouveau 0000:01:00.0: DRM: DCB outp 02: 048113b6 0f220010
nouveau 0000:01:00.0: DRM: DCB outp 03: 04011372 00020010
nouveau 0000:01:00.0: DRM: DCB outp 04: 028223a6 0f220010
nouveau 0000:01:00.0: DRM: DCB outp 05: 02022362 00020010
nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
nouveau 0000:01:00.0: DRM: DCB conn 01: 00410146
nouveau 0000:01:00.0: DRM: DCB conn 02: 00820246
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
usb 2-1: new high speed USB device number 2 using ehci_hcd
nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo ffff8804226ac800
fbcon: nouveaufb (fb0) is primary device
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.3: new high speed USB device number 3 using ehci_hcd
usb 1-1.3: New USB device found, idVendor=0930, idProduct=6544
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: TransMemory     
usb 1-1.3: Manufacturer: TOSHIBA 
usb 1-1.3: SerialNumber: FCE160898EAFCE311F50A69E
usb 1-1.3: configuration #1 chosen from 1 choice
Console: switching to colour frame buffer device 240x67
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1.5: new low speed USB device number 4 using ehci_hcd
dracut: Starting plymouth daemon
usb 1-1.5: New USB device found, idVendor=046d, idProduct=c077
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: USB Optical Mouse
usb 1-1.5: Manufacturer: Logitech
usb 1-1.5: configuration #1 chosen from 1 choice
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input3
generic-usb 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.5/input0
Refined TSC clocksource calibration: 3192.745 MHz.
Switching to clocksource tsc
usb 1-1.6: new low speed USB device number 5 using ehci_hcd
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
ata_generic 0000:00:16.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ata_generic 0000:00:16.2: setting latency timer to 64
scsi1 : ata_generic
scsi2 : ata_generic
ata1: PATA max UDMA/100 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0b0 irq 18
ata2: PATA max UDMA/100 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf0b8 irq 18
usb 1-1.6: New USB device found, idVendor=04ca, idProduct=005b
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: Goldtouch USB Keyboard
usb 1-1.6: Manufacturer: Lite-On Technology Corp.
usb 1-1.6: configuration #1 chosen from 1 choice
input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input4
generic-usb 0003:04CA:005B.0002: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input0
input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input5
generic-usb 0003:04CA:005B.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input1
usb 2-1.3: new high speed USB device number 3 using ehci_hcd
usb 2-1.3: New USB device found, idVendor=0bda, idProduct=0181
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: USB2.0-CRW
usb 2-1.3: Manufacturer: Generic
usb 2-1.3: SerialNumber: 20060413092100000
usb 2-1.3: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  alloc irq_desc for 34 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 34 for MSI/MSI-X
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems sxs apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
ata3: SATA max UDMA/133 abar m2048@0xfa025000 port 0xfa025100 irq 34
ata4: SATA max UDMA/133 abar m2048@0xfa025000 port 0xfa025180 irq 34
ata5: SATA max UDMA/133 abar m2048@0xfa025000 port 0xfa025200 irq 34
ata6: SATA max UDMA/133 abar m2048@0xfa025000 port 0xfa025280 irq 34
ata7: SATA max UDMA/133 abar m2048@0xfa025000 port 0xfa025300 irq 34
ata8: SATA max UDMA/133 abar m2048@0xfa025000 port 0xfa025380 irq 34
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: HDS722020ALA330 RSD HUA, JKAOA31D, max UDMA/133
ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3: SATA link down (SStatus 0 SControl 300)
ata4.00: configured for UDMA/133
ata5.00: ATAPI: HL-DT-ST DVD+/-RW GH50N, B102, max UDMA/100, ATAPI AN
scsi 5:0:0:0: Direct-Access     ATA      HDS722020ALA330  A31D PQ: 0 ANSI: 5
ata5.00: configured for UDMA/100
scsi 6:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GH50N    B102 PQ: 0 ANSI: 5
sd 5:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: unknown partition table
sd 5:0:0:0: [sda] Attached SCSI disk
usb-storage: device scan complete
scsi 0:0:0:0: Direct-Access     TOSHIBA  TransMemory      1.00 PQ: 0 ANSI: 4
sd 0:0:0:0: [sdb] 30310400 512-byte logical blocks: (15.5 GB/14.4 GiB)
sd 0:0:0:0: [sdb] Write Protect is off
sd 0:0:0:0: [sdb] Mode Sense: 45 00 00 00
sd 0:0:0:0: [sdb] Assuming drive cache: write through
sd 0:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 0:0:0:0: [sdb] Assuming drive cache: write through
sd 0:0:0:0: [sdb] Attached SCSI removable disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
dracut: Scanning for dmraid devices 
dracut: Found dmraid sets:
dracut: ddf1_44656c6c202020201000006010281f0b46978f65049ebfdc
dracut: Activating ddf1_44656c6c202020201000006010281f0b46978f65049ebfdc
dracut: ERROR: ddf1: wrong # of devices in RAID set "ddf1_44656c6c202020201000006010281f0b46978f65049ebfdc" [1/2] on /dev/sda
device-mapper: table: 253:0: linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: ioctl: device doesn't appear to be in the dev hash table.
device-mapper: table: 253:0: linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: ioctl: device doesn't appear to be in the dev hash table.
dracut: RAID set "ddf1_44656c6c202020201000006010281f0b46978f65049ebfdc" was not activated
dracut: RAID set "ddf1_44656c6c202020201000006010281f0b46978f65049ebfdc" was not activated
usb-storage: device scan complete
scsi 3:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
scsi 3:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
scsi 3:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
scsi 3:0:0:3: Direct-Access     Generic- MS/MS-Pro/HG     1.00 PQ: 0 ANSI: 0 CCS
scsi 3:0:0:4: Direct-Access     Generic- SD/MMC/MS/MSPRO  1.00 PQ: 0 ANSI: 0 CCS
sd 3:0:0:0: [sdc] Attached SCSI removable disk
sd 3:0:0:2: [sde] Attached SCSI removable disk
sd 3:0:0:3: [sdf] Attached SCSI removable disk
sd 3:0:0:4: [sdg] Attached SCSI removable disk
sd 3:0:0:1: [sdd] Attached SCSI removable disk
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
squashfs: version 4.0 (2009/01/31) Phillip Lougher
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: 
dracut: Mounted root filesystem /dev/mapper/live-rw
dracut: Loading SELinux policy
type=1404 audit(1512048663.195:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 309305 rules.
SELinux: 2048 avtab hash slots, 309305 rules.
SELinux:  9 users, 12 roles, 4215 types, 237 bools, 1 sens, 1024 cats
SELinux:  81 classes, 309305 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev loop2, type squashfs), not configured for labeling
SELinux: initialized (dev loop0, type squashfs), not configured for labeling
SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts
SELinux: initialized (dev drm, type drm), not configured for labeling
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1512048663.698:3): policy loaded auid=4294967295 ses=4294967295
dracut: 
dracut: Switching root
udev: starting version 147
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  alloc irq_desc for 35 on node -1
  alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: irq 35 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  alloc irq_desc for 20 on node -1
  alloc kstat_irqs on node -1
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  alloc irq_desc for 36 on node -1
  alloc kstat_irqs on node -1
e1000e 0000:00:19.0: irq 36 for MSI/MSI-X
sound hdaudioC0D0: ALC262: SKU not ready 0x411111f0
sound hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D0:    speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Front Mic=0x19
sound hdaudioC0D0:      Rear Mic=0x18
sound hdaudioC0D0:      Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
snd_hda_intel 0000:01:00.1: setting latency timer to 64
e1000e 0000:00:19.0: eth0: registered PHC clock
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 08:2e:5f:25:d7:26
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
sd 5:0:0:0: Attached scsi generic sg0 type 0
sr 6:0:0:0: Attached scsi generic sg1 type 5
sd 0:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:1: Attached scsi generic sg4 type 0
sd 3:0:0:2: Attached scsi generic sg5 type 0
sd 3:0:0:3: Attached scsi generic sg6 type 0
sd 3:0:0:4: Attached scsi generic sg7 type 0
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x17
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x17
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x17
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x17
platform microcode: firmware: requesting intel-ucode/06-2a-07
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11rh
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
microcode: CPU0 updated to revision 0x29, date = 2013-06-12 
microcode: CPU1 updated to revision 0x29, date = 2013-06-12 
microcode: CPU2 updated to revision 0x29, date = 2013-06-12 
microcode: CPU3 updated to revision 0x29, date = 2013-06-12 
device-mapper: table: 253:2: linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: ioctl: device doesn't appear to be in the dev hash table.
device-mapper: table: 253:2: linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: ioctl: device doesn't appear to be in the dev hash table.
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
bnx2fc: QLogic FCoE Driver bnx2fc v2.10.3 (October 15, 2015)
e1000e 0000:00:19.0: irq 36 for MSI/MSI-X
e1000e 0000:00:19.0: irq 36 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
snd_hda_intel 0000:01:00.1: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
fuse init (API version 7.14)
